Epoxy Finishing Filler

Epoxy Finishing Filler

Epifanes Epoxy Finishing Filler

A strong two-component finishing filler on epoxy resins. Very fi ne and shrink free. Provides a very smooth surface. Apply in thin layers only (max. 1 mm). Prior to use, stir each component separately and then thoroughly together until color is uniform. Do not use under 60°F./12°C. Best sandable properties are between 24 and 48 hours.

Fiberglass - Steel - Wood - aluminum: a fine epoxy finishing filler for use on Epifanes Epoxy Filler 1500 in two-component paint systems above and if needed below the waterline. If topcoated above the waterline with a one-component finish, first apply one coat Epifanes Poly-urethane Yacht Coating or Poly-urethane Primer.

Container Size
750 ml
750 ml is suffi cient for 14 sq. ft./4 m²/ @ 1 mm fi lm thickness

Filled areas must be well degreased with Epifanes Spraythinner for Paint and Varnish. This will prevent clogging of grease in the sandpaper and will ensure a better bonding. Follow by sanding
with 120.


Pot Life After Mixing: 15-40 minutes depending on temperature and filler volume

Mixing Ratio: By volume: 100 : 50
By weight: 100 : 50

Sandable: After 24 hours at 65°F./18°C.

Color: Grey